home contact

sitemap

Products

WAVE UV Lasers

Under the model name WAVE, the first product is a QCW system with average powers up to 200mW and repetition rates > 100kHz, the follow on product is a pulsed UV system producing 0.5W at 30kHz. Typical applications are micro-machining and rapid prototyping. 
WAVE QCW
WAVE 500
top

Viridian

Elforlight have designed and manufactured a 532nm CW laser system capable of achieving >300mw Single Longitudinal Mode. The increase in power level over the standard G4 series has not compromised the package, which remains compact and OEM friendly. 

This product introduction expands the areas that are currently addressed by the G4 series and provides a cost effective solution for medium power applications.
Viridian Datasheet
top

I4 Laser

New I4 Laser from Elforlight I4 series lasers are ideal slm lasers for injection seeding lamp pumped oscillators and for amplification. They also provide stable, quiet general laboratory sources.
Low power seed laser versions are tuneable in frequency over tens of GHz. Higher power versions (to 1 Watt) are fixed in frequency, making ideal spectroscopy sources.
I4 Seeders
High power I4 lasers at 1064nm
High power I4 lasers at 1342nm
top

FQ laser

Elforlight FQ Series Laser Q-switched average powers to 7W at 1064nm, 4W at 532nm, repetition rates single shot to 100kHz.

Particularly suited to a range of micromachining applications such as scribing, trimming, marking etc. YAG and YLF versions for low / high rep rates respectively.
Wavelength:

1064nm

Power range: Up to 7W
Spatial Mode : TEMoo, mē <1.2
Power Stability: Better than 2%RMS over 1 hour
Beam Diameter: 2mm at output aperture (other collimation options available)
Beam Divergence: <1mRad at 2mm diameter
Laser Head Size: 127mm x 110mm x 297mm
Cooling: Air cooled
FQ-500-5-Y-532
FQ-Series-1064
top

UV FQ laser

The new UV-FQ laser(link) is specially designed to replace Nitrogen lasers in MALDI systems, particularly high throughput instruments. Repetition rates to 1kHz, pulse widths approx. 4ns at 355nm, with excellent TEM00 beam quality, reliability and extended lifetimes offer real advantages to the user compared to the older gas laser technology. Also, the laser exhibits timing jitter <+/-1ns with respect to an external trigger input.
MALDI-TOF(Matrix Assisted Laser Desorption Ionisation- Time of Flight Mass spectroscopy).
top

B4 Laser

Diode pumped solid state (DPSS) lasers.
Wavelength:

473nm

Power range: 20mW, 40mW
Spatial Mode : TEMoo, mē <1.2
Longitudinal Mode: Single Longitudinal Mode (slm)
Power Stability: <+/- 2% over 8 hours
Noise: <0.5% RMS (typ 0.2%)
Beam Diameter: 1mm at output aperture
Beam Divergence: 1mRad (collimation options available)
Polarisation: >100:1 Vertical
Laser Head Size: 135mm x 50mm x 48mm
Cooling: Air cooled
top

G4 series

Elforlight G4 Laser G4 is a compact, single longitudinal mode, frequency doubled, diode pumped solid state, CW Laser System ideal for Laser based instrumentation. The ultra narrow linewidth results in long coherence lengths (>30m), ideal for holography and interferometry.
Wavelength:

532nm

Power range: G4-60: 60mW
G4plus100: 100mW
G4plus150: 150mW
G4plus200: 200mW
G4plus250: 250mW
Noise (20Hz to 2MHz) : <±0.5% rms (typ 0.2%)
Mode: TEMoo, mē <1.1
Beam diameter: 1mm at output aperture
Beam divergence: <1mrad (other collimation options available)
Amplitude stability: <±2% peak to peak over 2 hrs
Electrical requirements: AC mains adaptor provided (5Volts, 8Amps or 5/+12/-12V)
Laser head size: 106mm x 40mm x 40mm
Cooling: Air cooled
top

L series

The L series is a range of modest power scientific lasers featuring superb beam quality, with reduced linewidth options for spectroscopic applications.

I4 series are slm versions up to 700mW, suitable for injection seeding, sensing, amplification etc.

Available at 1064, 1340, 1319, 1047 and 1053nm
1340nm systems with powers to 1W
CW powers to 8Watts at 1064 nm
Standard power levels: 1.5W, 3W, 8W
Line narrowed (<1cm-1) 1W, 2W
Up to 3Watts at 1053nm or 1047nm, computer controlled wavelength switching
L series HPI 8000
top

HPG High Power Green lasers

HPG lasers provide a cost effective light source for display and alignment applications and for Ti Sapphire laser pumping.

5 Watts CW at 532nm

top

Short Pulsed Optical Technology (SPOT) laser

SPOT Laser

Elforlight SPOT Lasers, previously only available at 1064nm and 532nm, now has a UV version at 355 nm.  SPOT-UV produces pulses at <1.5ns (typically 1ns) at repetition rates from single shot up to 10kHz.

Specifications:

Model: Spot-10-500-1064 Spot-10-200-532 Spot-10-100-355
  Maximum pulse energy:  

50mJ

20mJ

10mJ

  Minimum pulse width:  

<2ns

<2ns

<1.5ns

Repetition Rate: single shot to >40kHz single shot to >40kHz single shot to >20kHz
Mode: TEMoo, mē <1.2 TEMoo, mē <1.2 TEMoo, mē <1.2
Beam diameter (at waist): 100um 100um 100um
Pulse to pulse stability (1sec): <2%RMS <5%RMS <10%RMS

See us at:

PHOTON 10 Southampton (UK)
24th – 25th August 2010

BMSS Cardiff (UK)
5th – 8th September 2010

2 year warranties now offered on selected products

New high power, line narrowed, 1064nm lasers now available

New higher power SPOT lasers to be introduced July 2010

6 Watt 532nm HPG lasers now available for Ti Sapphire pumping

SPOT lasers now being used for MALDI and Photo-acoustic imaging applications

Contact Elforlight for more details

Elforlight Ltd 
© 2010
top